How to Upload Photos Directly from Your Camera to Facebook or Instagram

Last updated: January 5, 2013

This article has had over 20,000 views. Thanks for reading it.

The Canon EOS 6D is one of several new Wi-Fi enabled cameras

The Canon EOS 6D is one of several new Wi-Fi enabled cameras

Most Instagram photos are poor quality because they were taken with a smartphone. You can now take great-looking photos from a Wi-Fi-enabled camera and upload them directly to the Internet without using a laptop. I’ll describe how this is done using a Canon EOS 6D, but the process is similar with other Wi-Fi cameras. The Canon EOS 6D is pricey, but you don’t have to spend a lot of money on a camera to do the things I’m describing. Wi-Fi enabled cameras like this Samsung model start around $150. Canon has affordable Wi-Fi cameras as well.

Canon's EOS Remote running on a smartphone

Canon’s EOS Remote running on a smartphone

Getting the Right Software

Start by downloading the free EOS Remote app from Google Play. After you’ve installed EOS Remote on your smartphone or tablet, you need to activate Wi-Fi on your camera and connect it to your mobile device. The next section describes how this is done.

Making Your Camera a Wi-Fi Hotspot

Wi-Fi Setup
The first time you setup your Canon EOS 6D camera as a Wi-Fi hotspot you’ll need to follow these steps:

  1. Press the Menu button on the EOS 6D and use the main dial to select the wrench icon with three dots next to it.
  2. Set Wi-Fi to ‘Enable’ and then move down to ‘Wi-Fi function’ and set a nickname for your camera (e.g. Canon 6D). Press the ‘Q’ button to tab down to the letters and the main dial to select them.
  3. Enter the desired name and press the ‘Menu’ button when you are finished. Press ‘Set/OK’ to proceed.
  4. Wi-Fi Function

  5. Now move the main dial to the second position labeled ‘Connect to smartphone’ and press Set. Then press ‘Set’ again to make the camera an access point and press ‘Set’ for OK.
  6. Press ‘Set’ again for ‘Easy connection.’ Then press ‘Set’ for OK.
  7. Now go to Settings > Wi-Fi on your tablet and select the nickname you entered for your camera.
  8. You’ll need to enter the encryption key that appears on the camera display into your tablet and touch ‘Connect.’
  9. Now launch the EOS Remote software on your tablet and touch the name of your camera on the tablet display. Then press ‘Set’ on the camera twice to save your settings.

This might seem like a lot of steps, but most of these only need to be performed once. After you’ve setup Wi-Fi, all you need to do is press the ‘Menu’ button and use the main dial to select ‘Wi-Fi function.’ Then you select ‘Connect to smartphone’ and ‘Connect.’ That’s it. If that choice isn’t available, first select ‘Exit’ and ‘OK’ and ‘Connect to smartphone’ will appear.

Once your camera is connected to your mobile device, you can use your smartphone or tablet as a remote control and viewfinder. You can also view all of the photos on your camera on your tablet at full resolution.

You can view, save or delete photos on your camera using  your tablet

You can view, save or delete photos on your camera using your tablet

Viewing Photos from the Camera on Your Tablet and More

Now that you are connected to your camera, there are many things you can do. Here are several examples:

  • Touch ‘Camera Image Viewing’ in the EOS Remote app to view all of the images on your camera.
  • Touch a photo to view it and swipe to the left to view the next image.

  • Touch the trash can icon to delete a bad photo.
  • Touch the icon on the far left to save your favorite photos to your smartphone or tablet. Keep in mind that these are reduced-quality images, so you should not delete the originals on your camera.
  • Now we're ready to upload our photo to Instagram

    We’re now ready to upload our photo to Instagram

    Uploading Your Photo to Instagram

    Instagram
    After you’ve completed the preceding steps, you are now ready to upload a photo to Instagram (or another social media site). You’ll probably only need to read this section if you haven’t used Instagram before.

    1. After you’ve saved the photo you wish to upload, you need to go to Settings > Wi-Fi on your tablet and select the wireless access point you use to access the Internet. Then touch ‘Connect.’ Note: This step is not required if you’re using a smartphone.
    2. Now touch the Home button and go to All Apps > Gallery
    3. Open the folder with the same name as your camera (e.g. Canon EOS 6D)
    4. Touch the photo you wish to upload. Then touch the share icon near the top of the screen.
    5. If you don’t see Instagram, touch ‘See all’ and select Instagram from the list.
    6. Now crop your photo, add a filter and touch the icon in the upper right to save your changes.
    7. Now enter a description and hashtags for your photo and touch the green checkmark to upload it to Instagram.

    Follow me on Instagram @rickschwar . You can see higher-resolution pictures taken by the Canon 6D on Google+ as well.

    More Fun With Wi-Fi

    This is just one of many things you can do with a Wi-Fi-enabled camera. You can use similar steps to upload a photo to Facebook or other sites. You can also do the following:

  • Transfer images between cameras
  • Remote control your camera
  • Send photos from your camera to a Wi-Fi printer
  • Upload photos to a Web service without using a mobile device (requires direct connection to a computer)
  • Send images directly to a DLNA-certified TV
  • Please refer to the documentation that came with your camera to learn how to do these things.

    Here are some other fun things you can do with a Wi-Fi-enabled camera

    Here are some other cool things you can do with a Wi-Fi-enabled camera

    Closing Thoughts

    If you don’t already have a Wi-Fi-enabled camera, you should make sure your next camera has this feature. It’s nice to be able to upload great looking photos without using a computer.

    – Rick

    Copyright 2013 Rick Schwartz. All rights reserved. Linking to this article is encouraged.

    Follow me on Twitter @mostlytech1

    Optimizing Your Network for Multimedia Streaming

    Last updated: January 5, 2014

    This article has had almost 20,000 views. Thanks for reading it.

    How to Optimize Your Home Network for Multimedia Streaming

    Wireless devices can be found many places in a typical home


    Wireless networks can be found in almost every home and office. Setting up a Wi-Fi network for normal use is easy. But when you try to stream high-quality video, you’re likely to experience occasional stuttering or rebuffering. According to a study, almost one in five U.S. Internet users are unable to stream 720p HD video reliably. In some states, 40% of consumers cannot do this. When problems like this occur, you can do several things to improve the situation:

    1. Use an uncrowded channel – Make sure you’re not sharing the same Wi-Fi channel with others close to you. Many 2.4GHz wireless access-points default to the same channel when they are powered up. This can make congestion worse and lower your throughput. Download software like Farproc’s free Wifi Analyzer to get a visual picture of your network. It even tells you which are the best channels to use. Most routers will allow you to set the channel using your web browser.
    2. Utilities like this one tell you which wireless channels to use.

    3. Avoid overlapping channels – Use the channels 1, 6, or 11 when possible, because they are non-overlapping.
    4. Upgrade for more speed – If you have an 802.11b or 802.11g wireless router, consider upgrading to an 802.11n or 802.11ac router. Both are capable of faster data speeds and also support the less crowded 5GHz band. Some 802.11ac routers are capable of speeds over 1Gbps.
    5. The 2.4GHz band is much more crowded than the 5GHz band

    6. Use the 5GHz band if your devices support it – The 5GHz band is faster and not as susceptible to interference from cordless telephones, microwave ovens, baby monitors, Bluetooth devices and wireless keyboards as the 2.4GHz band. It’s also much less crowded and should be used as long as your devices support it, and you are not too far away from your wireless access point.
    7. A low-cost Wi-Fi Booster

      A low-cost Wi-Fi Booster

    8. Extend your range – If your problem is signal strength-related, consider using a Wi-Fi booster/repeater or wireless access point with better antennas like this one. By adding the $40 Wi-Fi booster shown on the right, I was able to increase my download speeds by almost 400%. An even better option for those who have a wired Ethernet network is to purchase a second router that supports 802.11ac. Make sure to set it up as an access point where you connect the first router to the port 1 and NOT the WAP port. Also make sure to disable the DHCP server. More details here.
    9. Consider wireless alternatives – When you’re having problems steaming HD video, you may want to consider wireless alternatives like HomePlug Powerline AV adapters. If you go this route, make sure your adapter is HomePlug AV-compatible so you can mix and match devices from other companies. According a recent article in Maximum PC, last-generation Homeplug AV 200 adapters were supposed to be capable of speeds of up to 200Mb/s. Even though they only got real world speeds were 60-70Mb/s, that’s enough for a single HD stream. Newer devices support the IEEE 1903 standard which is capable of theoretical speeds up to 500Mbps and real world speeds up to 100Mbps. These speeds are even faster than you can get over standard Ethernet wiring, so you should be able to stream multiple HD movies at once in your home using multiple adapters. Consider the TP-Link AV-500 TL-PA511KIT or eNetgear Nano 500 XAVB5101 adapters. Those are two of the best affordable adapters available today. Both should be capable of real world read speeds of over 62Mbps and real world write speeds over 54Mbps.

      Another good wireless alternative are MoCA adapters, which transmit multimedia data over coax cable. Both of these are capable of higher data rates and more reliable than most wireless routers.

    10. Test your download speed – If you stream media over the Internet, you should know what your download speed is. Even more important than the peak speed is the average speed. Watch whether the data rate is consistent, or fluctuates a lot. There are several good sites and apps which do this. More info.

    An Ethernet Over Coax MoCA Network Adapter

    Dual-Band Wi-Fi FAQ

    Do all 802.11g/n products support dual-band?
    No. 802.11ac was designed specifically for the 5GHz band, however, so it seems likely all ‘ac’ products will support 5GHz.

    Who makes dual-band routers?
    Most wireless routers sold over the past few years support dual-band. Examples include: Apple’s Airport Express, all ASUS routers (RT-AC66U, RT-N65U, RT-N66U and EA-N66) the Linksys N600, N750, N900 and AC1750 as well as routers from Netgear.

    Here are just a few of the smartphones with 5GHz Wi-Fi support

    Here are just a few of the smartphones with 5GHz Wi-Fi support

    Do you have a list of mobile devices that support 5GHz Wi-Fi?
    Here are a few of the devices which support dual-band Wi-Fi. Note: This list is not current. These days most mobile devices support 5GHz.

    • Amazon Kindle Fire HD
    • Amazon Kindle Fire HDX
    • Apple AirPort Extreme (2009 and later)
    • Apple computers with Wireless-N support
    • Apple iPad
    • Apple iPad 2
    • Apple iPad 3
    • Apple iPad 4
    • Apple iPhone 5 (and later)
    • Apple TV (2nd and 3rd gen.)
    • ASUS Nexus 7
    • BlackBerry PlayBook
    • Google Nexus 10
    • HTC Droid DNA
    • HTC Rezound
    • HTC Windows Phone 8x
    • LG Nexus 4
    • LG Nexus 5
    • Linksys EA-3500 wireless router
    • Linksys E-4200 wireless router
    • Linksys EA-4500 wireless router
    • Microsoft Surface RT
    • PCs with Wireless-N support (most, not all)
    • Samsung Galaxy Premier
    • Samsung Galaxy Nexus
    • Samsung Galaxy Note 10.1
    • Samsung Galaxy Note II
    • Samsung Galaxy Tab 3 8
    • Samsung Galaxy Note 3 (and later models)
    • Samsung Galaxy S II
    • Samsung Galaxy S II Skyrocket
    • Samsung Galaxy S III (and later models)
    • Samsung Galaxy S III mini
    • Samsung Galaxy S 4
    • Samsung Galaxy Tab 10.1 (possibly other sizes as well, but NOT the Galaxy Tab 2)
    • Samsung Nexus 10
    • Slingbox 500

    Where can I go to find out if my devices supports Dual-band Wi-Fi?
    Search for your device here. It’s dual-band if there is a “1” under 5.0 GHz transmit and receive.

    Is 5GHz Wi-Fi faster than 2.4GHz Wi-Fi?
    It you refer to the chart below, you’ll see some routers are capable of higher data rates when using the 5GHz band. More info.

    Chart courtesy of Maximum PC

    Is there a downside when using 5GHz Wi-Fi?
    Yes. Not all devices support 5GHz Wi-Fi. Also, the higher frequency signals of 5GHz networks do not penetrate walls as well as 2.4GHz signals. This limits their reach inside some homes.

    How can you force your devices to use 5GHz Wi-Fi?
    ‘Forget’ the 2.4GHz network and connect to the 5GHz one.

    What’s better than 802.11n?
    802.11ac is a new wireless-networking standard which is capable of speeds that are almost 3x faster than 802.11n. You can learn here about it here. In addition to higher throughput, 802.11ac has wider coverage and improved power efficiency. Although real-world speeds won’t always exceed 1Gbps, 802.11ac should be capable of speeds of 500Mbps at distances of 50 meters. Apple’s Macs now include support for 802.11ac. All premium routers now include 802.11ac support as well. Asus shipped a laptop with support for 802.11ac over a year ago.

    Is anything else being done to improve streaming of multimedia around the house?
    Yes, companies like Qualcomm are working on technology called StreamBoost. When combined with 802.11ac, this is supposed to improve performance by managing network traffic. StreamBoost-compatible products let users to see all the devices connected to their network and monitor the real-time bandwidth usage of every device.

    What comes after 802.11ac?
    According to this blog, “802.11ad improves upon the wireless capabilities introduced in 802.11n. Ideally, 802.11ad will allow devices to communicate over four, 2.16GHz-wide channels, delivering data rates of up to 7 Gigabits per second, even for mobile devices with limited power, a significant improvement over both 11n and 11ac.” More info about 802.11ad.

    There are also people who say G.hn is the next big thing in home networking. It uses existing home wiring including coaxial cables, phone lines and power lines. You can learn here about it here.

    More about what lies next in networking.

    Another good article related to this topic.

    If you follow the above guidelines, you should be able to stream high-definition videos without problems. Let me know if I missed any good Wi-Fi tips.

    – Rick

    Copyright 2013-2014 Rick Schwartz. All rights reserved. Linking to this article is encouraged. Network photo courtesy of Apple.


    Follow me on Twitter @mostlytech1